| Author |
Message |
    
Tripledeuce
Junior Member
Username: Tripledeuce
Post Number: 12
Registered: 12-2004
| | Posted on Monday, February 13, 2006 - 2:04 pm: | 
|
Does any have the calibation instuction for a tc-4001
73' |
1861
Intermediate Member
Username: 1861
Post Number: 452
Registered: 2-2004
| | Posted on Monday, February 13, 2006 - 2:58 pm: |
|
MINE WAS WAY OFF , I CALIBRATED IT WITH ONE I TRUST -- THE POTS ARE ALL MARKED ( 4000, 2000 , 200 , 20 , AND SWR ) TOP TO BOTTOM |
Pogo12
Junior Member
Username: Pogo12
Post Number: 43
Registered: 3-2005
| | Posted on Sunday, June 25, 2006 - 1:36 pm: |
|
If yours is not marked as was the case with the older tc4001s then heres how they are set up.Turn the meter so that the face is facing to your left.On the pc board You will see 3 pots at the top and 2 right below them.Starting from the top left and going right you have a 2000watt pot/200watt pot/20watt pot.at the bottom left is your 4000watt pot and to the right is your mod set line pot.The older meters were hard wired(soldered) to the pc board and the new ones have plug in wires. |
|
