| Author |
Message |
    
Freebird
Intermediate Member
Username: Freebird
Post Number: 395
Registered: 1-2003
| | Posted on Tuesday, March 07, 2006 - 3:24 am: | 
|
I got my connex 4800 dxl a few weeks ago from copper and everything was working good until a few days ago.For some reason when i first turn my radio on the roger beep is very week.Its not the same pitch its a lower pitch and very very week can barley hear it.but it seems once the radio is warmed up for about half hour or more its ok.does anyone know why it would do this? |
Hotwire
Senior Member
Username: Hotwire
Post Number: 1039
Registered: 1-2005
| | Posted on Wednesday, March 08, 2006 - 10:30 am: |
|
Cold solder joint? ARe you describing the beep from what you hear in talkback or is your radio buds conplaining? Good thing you bought from Copper for the warranty! WoW! Never used mine so maybe I better check it! |
Freebird
Intermediate Member
Username: Freebird
Post Number: 396
Registered: 1-2003
| | Posted on Thursday, March 09, 2006 - 2:46 am: |
|
no one has told me anything yet since I dont use the roger beep all the time but most of the time when i fisrt turn the radio on I just put the beep on to make sure everything is working and i found this little problem.yes it is good i bought it from coppper.best place to buy from!but yes i hear it in the talk back and its real week sounding and a lower pitch like it said then after a hour or so its ok very strange.just wondering how to I calibrate THIS RADIO TO CHECK THE SWRS?i really cant find anything to do it.thanks |
Hotwire
Senior Member
Username: Hotwire
Post Number: 1043
Registered: 1-2005
| | Posted on Thursday, March 09, 2006 - 10:34 am: |
|
Well good luck with the roger beep. The radios SWR circuit calibrates itself. No need to manually do it. Just push the SWR button and key the mic, there you go! |
