| Author |
Message |
    
Audiophile73
Member
Username: Audiophile73
Post Number: 88
Registered: 5-2004
| | Posted on Monday, April 10, 2006 - 6:32 pm: | 
|
Ok I opened my radio up to raise the dead key and I did, but thats all i touched i swear. Sometimes when I turn it on I don't get any audio in my recieve. Then if I key up and let the button go my recieve comes back. Has this ever happened to anybody |
1861
Intermediate Member
Username: 1861
Post Number: 474
Registered: 2-2004
| | Posted on Monday, April 10, 2006 - 7:05 pm: |
|
TRY A DIFFERENT MIC |
Kid_vicious
Senior Member
Username: Kid_vicious
Post Number: 1403
Registered: 9-2004
| | Posted on Tuesday, April 11, 2006 - 12:36 am: |
|
also check to see if you might have pulled on one of the speaker wires.
definitely try a different mic too.
matt |
Hotwire
Senior Member
Username: Hotwire
Post Number: 1154
Registered: 1-2005
| | Posted on Wednesday, April 12, 2006 - 1:31 pm: |
|
I had a radio with the same problem one time. I'm trying so hard to remember the fix. I would check coax and antenna first. Check for cold solder joints. When you got inside its possible the cold solder joint got worse or you loosened something by mistake. When you key the mic its kinda like kicking in the recieve. Like a jump start! Check for debris in your mic plug and broken solder connections. I bet you will find something up with the coax. Also are you running an amp? You raised the dead key so maybe the amp didnt like that? Try removing the amp and see what you get. If I remember the solution to my radio I had I will post it. good luck! 73 |
