| Author |
Message |
    
Big_rigger
Junior Member
Username: Big_rigger
Post Number: 34
Registered: 8-2005
| | Posted on Wednesday, May 10, 2006 - 12:21 am: | 
|
need to put a dynamike control in all wires fell off i have a grey black pink wires need help |
Viking
Intermediate Member
Username: Viking
Post Number: 248
Registered: 2-2002
| | Posted on Wednesday, May 10, 2006 - 10:43 am: |
|
The wire that goes to C106 (or is it 108 [blurred schematic]) attaches to the center pin.
The wire that goes to ground attaches to a side pin.
The remaining wire that goes to the mike jack (through L404 to pin 1) goes to the other side pin.
If when you adjust the control and it's backwards (up is down and down is up) switch the 2 side pin wires. |
Big_rigger
Junior Member
Username: Big_rigger
Post Number: 35
Registered: 8-2005
| | Posted on Saturday, May 13, 2006 - 12:03 pm: |
|
thanks a lot viking i owe you one |
