| Author |
Message |
    
Wildchild
Junior Member
Username: Wildchild
Post Number: 31
Registered: 9-2003
| | Posted on Saturday, May 13, 2006 - 1:10 am: | 
|
I just got an used TUG9 D104 I wired it to my Galaxy DX 77 and when you key the mic it has a bad squeal. I know it involves a resister and a disk cap but I cant for the life of me remember what the values are and how to wire them into the mic.
Can someone help me on this issue. |
Unit199
Intermediate Member
Username: Unit199
Post Number: 250
Registered: 8-2003
| | Posted on Saturday, May 13, 2006 - 6:32 am: |
|
Wire a 4700 ohm resistor in series with audio wire and then wire a .001 or .01 microfarad ceramic disc capacitor above or below resistor then other end to shield.
HOPE THIS HELPS.
HARVE
Unit199
CEF210
KBOYVK |
Funtimebob
Intermediate Member
Username: Funtimebob
Post Number: 217
Registered: 5-2002
| | Posted on Monday, September 25, 2006 - 2:25 pm: |
|
a variation I saw once (but havn't tried) years ago was to use a 10uf coil instead of a resistor along with caps to ground. |
