Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Superstar 360 fm « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Freebird
Intermediate Member
Username: Freebird

Post Number: 439
Registered: 1-2003


Posted on Wednesday, June 21, 2006 - 10:54 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
my friend bought a used super star 360 fm not sure what year this radio was made?but anyway did these radios come with the extras over 40 and under 40 or did they have to be converted?we found a chart online for it and it says ch 50 lets say is hi and ch 9 up but when we do that where not on ch 50 and we cant find where it is....if it did have to be converted what should we look for?
Top of pagePrevious messageNext messageBottom of page Link to this message

Coyote
Advanced Member
Username: Coyote

Post Number: 786
Registered: 11-2004


Posted on Thursday, June 22, 2006 - 9:11 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Here is the conversion procedure, maybe you can determine if its been converted or not.

Connect MB8719 Pin 8 to GND to get new Channel`s. Disconnect Yellow wire (top of CH9 switch) from Rotary Switch PCB. Connect Yellow wire to IC3 Pin 8. Disconnect Pink wire on CH9 switch (bottom of CH9 switch) and connect it together with White wire on CH9 switch (midle on CH9 switch). CH9 switch can now be used as switch for extra channels. Re-adjust L15 so the VCO oscillate properly on all channels.

You could also connect a frequency counter to it and see where your going.

CEF-443

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: