| Author |
Message |
    
Dmh
Junior Member
Username: Dmh
Post Number: 23
Registered: 5-2002
| | Posted on Tuesday, June 27, 2006 - 7:52 am: | 
|
Has anyone done a performance review of the new Wilson Slide to tune No ground antennas? I am a slip seat driver & this looks to be a cool (& safer) way to tune my antenna w/o hanging off the side of the BIG RIG. That would really be nice to tune my SWR w/o leaving the A/C comfort of the cab when it it 100 degrees with 80% humidity DOWN SOUTH . |
Tech808
Moderator
Username: Tech808
Post Number: 10400
Registered: 8-2002
| | Posted on Tuesday, June 27, 2006 - 10:18 am: |
|
Dmh,
Sorry never used one but here is the information I have on them.
Wilson Fiberglass No Ground Antenna Kit
3 Ft.
Part #: 305-430
* No ground required for operation
Tune antenna from inside of vehicle with slide-to-tune coax for low swr
* Special no-ground antenna with 20 gauge wire
* 3/8" fiberglass rod for heavy duty performance
PVC protective covering around antenna
* Power Handling: 300 watt rated
* 5/8 wave design
* Works with any CB radio on AM, & SSB
* Weather channel ready
* Frequency range: 26.750 - 27.750MHz (less than 2.0:1)
* Available in 3' and 4' lengths, Black only
* One year limited warranty from date of purchase
* Altering of coax or antenna voids warranty
Each Antenna Kit Includes:
* 3' or 4' fiberglass "No Ground" antenna
* Heavy duty aluminum 3-way mount w/ stainless hardware
* 17' Unique slide-to-tune coax with tinned copper wire and clear cover
* NOTE: (Coax and antenna will not work separately)
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Dale
Advanced Member
Username: Dale
Post Number: 531
Registered: 12-2002
| | Posted on Tuesday, June 27, 2006 - 12:18 pm: |
|
sorry, but no never seen this one.only seen one tech808 posted |
