Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Galaxy 959 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Revpo
New member
Username: Revpo

Post Number: 4
Registered: 7-2006
Posted on Saturday, July 22, 2006 - 9:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
I oicked up a galaxy 959, most of the time it xmit's but sometimes no, you have to unplug the mic plug then push it back in without screwing down the connector on the mic cable..could it be a bad solder joint on the other side or????


tnx for any help
revpo
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 1584
Registered: 1-2005
Posted on Sunday, July 23, 2006 - 12:48 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
When you say does not transmit do you mean that you get no modulation but a dead key? Or the mic does not switch on the transmitter at all. When you key the mic does it silence the reciever? First I would be sure your coax connectors are good. Then check the connections inside the mic plug.Possible to have a cold solder joint in the radio. Also check for any debris in the male and female mic plugs. I used to own a 959. Not a bad radio at all! Wish I had it back from the guy I sold it too but he likes it to much.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: