| Author |
Message |
    
Rebel3712
New member
Username: Rebel3712
Post Number: 1
Registered: 5-2004
| | Posted on Tuesday, August 01, 2006 - 1:45 am: | 
|
I have a stock Uniden mic from a old Grant (none XL). The mic has 5 wires// red,black,shield,white,yellow i wish to wire this to a Cobra 148 GTL but some reason i cannot get this mic wired correctly. Could someone please guild me in the correct direction. here is how i think it should be, but does not work correctly.
PIN 1 = White (AUDIO)
PIN 2 = Shield (GRD)
PIN 3 = Black (RX)
PIN 4 = Yellow (SW)
PIN 5 = Red (TX)
Thanks for any help recieved. |
Tech808
Moderator
Username: Tech808
Post Number: 10689
Registered: 8-2002
| | Posted on Tuesday, August 01, 2006 - 7:30 am: |
|
Rebel3712,
The STOCK wiring of the Grant 5 wire microphone and the Cobra 148 GTL 5 wire microphone are the same and should be:
PIN #1 ~ AUDIO
PIN #2 ~ SHIELD
PIN #3 ~ RECEIVE
PIN #4 ~ Sw. WIRE
PIN #5 ~ TRANSMIT
You may have a bad mic or a bad cord with a short/break in it, if it is not working.
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Rebel3712
New member
Username: Rebel3712
Post Number: 2
Registered: 5-2004
| | Posted on Tuesday, August 01, 2006 - 8:33 am: |
|
Would you happen to know what each wire is on the stock Uniden mic by color? i do know this is the original cord on this mic as i am the one who purchased the radio new it came on, also this mic works fine on a cobra 29 4 pin. |
Tech808
Moderator
Username: Tech808
Post Number: 10693
Registered: 8-2002
| | Posted on Tuesday, August 01, 2006 - 8:52 am: |
|
Rebel3712,
Sorry but that information I do not remember.
Hopefully another Copper Forum Member will be able to help you with that information.
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Rebel3712
New member
Username: Rebel3712
Post Number: 3
Registered: 5-2004
| | Posted on Tuesday, August 01, 2006 - 9:38 am: |
|
Issue Resolved.
Thanks for the help. |
