Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Cobra 200 GTL DX Mode Switch « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobemartin
New member
Username: Bobemartin

Post Number: 8
Registered: 8-2006
Posted on Thursday, October 19, 2006 - 12:32 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Technical question about the mode switch. For some strange reason the TX is dropping out on my radio. The way I get it back is key the mic and switch the mode switch from AM to SSB. When the TX drops out the RX is still there. My question is does the mode switch separate the TX and RX some way or are both present on the switch. I thought the mode switch would control both TX and RX and if the switch was causing the problem I would think the TX and RX would both go not one or the others, but the way I get the TX back would indicate that the TX and RX is seaparted on the mode switch.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dx431
Senior Member
Username: Dx431

Post Number: 1201
Registered: 2-2002
Posted on Thursday, October 19, 2006 - 1:47 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

You've got a defective radio. My suggestion would be to send your radio to a Cobra Service Center for repair.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: