Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » 99v

« Previous Next »

Author Message   Bracketbird Junior Member Username: Bracketbird Post Number: 34 Registered: 3-2002 Posted on Tuesday, October 31, 2006 - 11:02 pm:        I have had a 99v sitting on a shelf for the last few months after a recent move. It recieves on freq but tx on wrong freqs...there up and down all over the place except where its supposed to be.Worked fine when i put it on shelf. What to start with? thanxs   Hotwire Senior Member Username: Hotwire Post Number: 1962 Registered: 1-2005 Posted on Wednesday, November 01, 2006 - 11:03 am:        Thats odd. Check for cold solder joints. Also I had a Galaxy that I did some mods to and it started doing similar to what your describing. I opened it back up and found out that a little plug was pulled out of its socket. This little plug was connected to part of the pll and the freq counter. Check for something like that especially if its been modded around with. Also just for grins, its a shot in the dark, try turning the radio on and off real quick like a few times. I have a Cobra like that with the same problem and when I switch it off and on a few times it goes back on freq. Strange I know but hey it worked for me! good luck Kenny CEF491

Add Your Message Here Post: Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: