| Author |
Message |
    
Troyota
New member
Username: Troyota
Post Number: 8
Registered: 4-2004
| | Posted on Wednesday, November 08, 2006 - 11:56 pm: | 
|
i have a wawasee meter and digital freqency display that is giving a little trouble. the watt meter works perfect, but the digital freq counter may display any frequency. it only works with correct frequency when i dead key about 100-200 watts in it. then when i modulate it freaks out, and shows almost anything. also when i just dead key from 1-10 watts and swing 30-50 it will display wrong.... maybe an internal regulator or something???
any help appreciated, thanks guys. |
Draft
Intermediate Member
Username: Draft
Post Number: 103
Registered: 7-2006
| | Posted on Thursday, November 09, 2006 - 9:01 am: |
|
MY BLACKCAT DOES THE SAME WHEN I OVER-MODULATE. |
Troyota
Junior Member
Username: Troyota
Post Number: 10
Registered: 4-2004
| | Posted on Thursday, November 09, 2006 - 1:53 pm: |
|
mine does it when i dead key 1-10 watts in it, with no modulation. the only time i reads right is when i dead key 100-200 watts in it. then when i modulate it goes haywire. |
Tecnicoloco
Intermediate Member
Username: Tecnicoloco
Post Number: 100
Registered: 4-2003
| | Posted on Thursday, November 09, 2006 - 8:15 pm: |
|
Hi:
My Wawasee Frecuency Counter Only,does the same thing,accurate reading with no modulation on AM,with modulation goes haywire with only 1 to 10 watts.
My 2 Pesos
Tecnicoloco
CEF-117
Sonora,Mexico
73's. |
Troyota
Junior Member
Username: Troyota
Post Number: 13
Registered: 4-2004
| | Posted on Friday, November 10, 2006 - 10:52 pm: |
|
my reading is incorrect with only 1-10 watts dead key. only correct reading is with 100-200 dead key. maybe a resistor or something. it would be fine if i had a correct reading at 1-10 watts dead key, as i talk local with no power added. i have a 142 with extra channels, and would like to know what frequency they are, without having to look them up on the road map. |
Troyota
Junior Member
Username: Troyota
Post Number: 20
Registered: 4-2004
| | Posted on Thursday, November 15, 2007 - 10:33 pm: |
|
well i got the ole black cat out again. trying to figure this out. when im running barefoot radio i have no reading on f/c. just 0's. anyone got any ideas?
funny i just noticed it had been a year since i first posted this. i had other meters and counters since then. traded out, just kept this one on the back shelf. |
Badbones_bob
New member
Username: Badbones_bob
Post Number: 2
Registered: 2-2019
| | Posted on Thursday, April 04, 2019 - 12:29 pm: |
|
MINE DOES THE SAME THING AFTER READING THESE REPLIES, I TESTED IT OUT AND IT'S FINE WHEN I TURN MY MODULATION DOWN, THANKS |
