Author |
Message |
Mayor513
Intermediate Member Username: Mayor513
Post Number: 174 Registered: 3-2002
| Posted on Wednesday, January 10, 2007 - 5:11 pm: |
|
--Hi, all. Can anyone tell me what the wiring diagram is for the Ten-Tec Omni VI? Thanks. |
Slugo4449
Intermediate Member Username: Slugo4449
Post Number: 147 Registered: 7-2004
| Posted on Thursday, January 11, 2007 - 4:02 pm: |
|
Mayor are you looking for the pinout for a mic? |
Mayor513
Intermediate Member Username: Mayor513
Post Number: 175 Registered: 3-2002
| Posted on Thursday, January 11, 2007 - 10:13 pm: |
|
--Hi. I just got an email a bit ago and here is what all the pins are: Pin 1: mic audio Pin 2: Ground Pin 3: PTT Pin 4: Microphone voltage |
Slugo4449
Intermediate Member Username: Slugo4449
Post Number: 148 Registered: 7-2004
| Posted on Friday, January 12, 2007 - 12:32 am: |
|
I guess since the header of this string is in mic wiring then you are. OK, the Omni VI uses any standard Ten Tec 4 pin mic. The 4 pin mic connector is a Ten Tec P/N 35057. Pin #1 goes to the + side of the mic element. Pin #2 goes to the – side of the mic element Pin #3 goes to Push to Talk switch Pin #4 is a 9VDC connection. It is used only if the mic element is an electret condenser that requires a polarizing voltage. You MUST GROUND the shell of the plug. What kind of mic are you going to use and then we can go from there? 73, Marty |
Mayor513
Intermediate Member Username: Mayor513
Post Number: 176 Registered: 3-2002
| Posted on Friday, January 12, 2007 - 11:30 am: |
|
--Hi, Slugo4449. Well, I really don't know what kind or microphone I plan on using. The radio does not have a microphone with it, so if the average CB mic. will work, I will use it for now. If I use something I own at the moment, I can use either an Astatic D104M6B power mic. handheld, or an Astatic 636L noise canceling. I have no idea how either of these microphones will sound, though. Maybe Heil Sound or Ten-Tec make good microphones for this rig. Thanks. |
Slugo4449
Intermediate Member Username: Slugo4449
Post Number: 149 Registered: 7-2004
| Posted on Friday, January 12, 2007 - 3:07 pm: |
|
Mayor: All Ten Tec 4 pin mics work on this radio. So If you find a website that shows the wiring for any other models of Ten Tec radios that are 4 pin, it will work on the Omni Series. 73 Marty |