| Author |
Message |
    
Moderator120
Moderator
Username: Moderator120
Post Number: 57
Registered: 11-2006
| | Posted on Saturday, February 17, 2007 - 11:00 am: | 
|
I have this base radio. A sweet radio, and she works great, but the LEDs need to be replaced. I am not looking forward to it, but I have a LED that gone, so I might as well replace them all. I don't care what color the LED is, but I need to know where to get one. There are 9 pins on the top, and 9 on the bottom. So any ideas as what kind it is?
Mike
Moderator120
CEF#120/HAM #222
KB1NYD
CVC#041
|
Moderator120
Moderator
Username: Moderator120
Post Number: 60
Registered: 11-2006
| | Posted on Monday, February 19, 2007 - 10:02 am: |
|
Well I took the LED channel display out, then resoldered it back in. I made sure to do a clean job. I thought it may have been a bad solder job. But the one bar still doesn't work. So I do need a new channel display. The trouble is I need a 18 pin one, 9 on the top and 9 on the bottom. And all the new ones I look at are 16 pins. So where do I find a 18 pin LED for my channel display?
Mike
Moderator120
CEF#120/HAM #222
KB1NYD
CVC#041
|
Moderator120
Moderator
Username: Moderator120
Post Number: 64
Registered: 11-2006
| | Posted on Wednesday, February 21, 2007 - 6:03 pm: |
|
Well I found some that look to be the right kind. We'll see when they get here!
Mike
Moderator120
CEF#120/HAM #222
KB1NYD
CVC#041
|
Hyperno_1979
Intermediate Member
Username: Hyperno_1979
Post Number: 292
Registered: 12-2005
| | Posted on Thursday, February 22, 2007 - 11:12 pm: |
|
Where did you find them Sir Nog?
CEFFFCEF
Bob
CEF703
CVC26.
|
Moderator120
Moderator
Username: Moderator120
Post Number: 65
Registered: 11-2006
| | Posted on Thursday, February 22, 2007 - 11:39 pm: |
|
Auction site. I bought 2 sets, just in case I never find them again!
Mike
Moderator120
CEF#120/HAM #222
KB1NYD
CVC#041
|
