| Author |
Message |
    
Ikei
New member
Username: Ikei
Post Number: 1
Registered: 3-2007
| | Posted on Sunday, March 11, 2007 - 10:32 pm: | 
|
Information Please.
My guess is you're going to say that the wiring for my 1976 Turner +3, used on my 1976 J.C. Penny 6218 is the same as the new Magnum S980 I just bought from Copper.
Is this correct?
Shield/Red =1
White =2
Blue =3
Black =4
If so I'd better dust off my old 1965 SuperMag and tune for 10 meters.
Thanks |
Tech808
Moderator
Username: Tech808
Post Number: 13221
Registered: 8-2002
| | Posted on Sunday, March 11, 2007 - 11:22 pm: |
|
Ikei,
The S-9-80 Microphone Wiring (For BOTH Microphone Jacks) is:
Pin #1 ~ Ground
Pin #2 ~ Microphone Audio
Pin #3 ~ Transmit
Pin #4 ~ Receive
Lon ~ Tech808 ~ N9CEF
CEF#808 ~ CEF HAM#33 ~ CVC#002
10-10 #61493 ~ 10-10 VP#2688
Tech808@copperelectronics.com
|
Audio_drive
New member
Username: Audio_drive
Post Number: 6
Registered: 1-2009
| | Posted on Sunday, February 05, 2012 - 12:10 am: |
|
can anyone post the mic. wiring for the echo max 2000 to the magnum S 980? |
