Copper Talk » Ask The Tech » General Technical Questions » Archived Messages » COAX LENGHT/ TOO LONG? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Lugnut
Posted on Sunday, January 06, 2002 - 9:30 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I HAVE A GALAXY SATURN,A99 ON A 50FT. TELESCOPIC MAST POLE. I'M GOING TO MOVE MY RADIO TO THE OTHER END OF MY HOUSE. MY QUESTION IS THIS; I NOW HAVE 75FT. OF COAX, AND I'M GOING TO HAVE TO ADD ANOTHER 50FT ROLL TO REACH. IS THIS TOO MUCH? NOT ENOUGH? ANY ADVICE WILL BE GREATLY APPRECIATED.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech181
Posted on Monday, January 07, 2002 - 12:44 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Lugnut,

The total of 125 feet you have will not be a problem. I would like to suggest a few things though. One the coax preferably should be all one piece. With every coax connection you have loss, and that can increase SWR and decrease power. If you are going to connect the coax together use 2 PL-259's and a barrel connector. Don't get funky and try to solder the coax together at the joint.

Secondly, for a 125 foot run, try to use a good grade of coax like RG-213. It's a little more expensive but, once again, less loss. It's also better shielded that RG-58 and that helps to prevent RFI and TVI problems.

I have an 80 foot run of RG-213 into an A-99 with no TVI problems at all. None.

Finally, if you plan to use "power" be careful where you run the coax. Runs of coax near telephone lines, and cable TV lines will tear things all up if you are running excessive power and modulation.

You could write a book on this topic but these are the main areas of concern.

Steve
Tech181
Tech181@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Rodder54
Posted on Thursday, January 10, 2002 - 11:52 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

tech181 does the coax make a differance on ampplifyed tv (stereo tv's) thats the only problem i have with tv's if i am on AM i am heard next door . ssb they cant under stand me at least . my coax is the small white .when i bought it in 1985 at that time it was the good stuff .
Top of pagePrevious messageNext messageBottom of page Link to this message

Bigbob
Posted on Friday, January 11, 2002 - 7:03 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

LUGNUT,you might also try N-connectors they are less lossy and water proof to boot.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech181
Posted on Friday, January 11, 2002 - 7:43 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Rodder,

1985? It may be time to replace that old stuff. Try RG-8X or if you are partial to the heavy stuff RG-213. It depends on power and length of run. Yes, you can tear stuff up, especially TV's that are connected to an antenna rather than cable or satellite. Lossy coax can cause this problem as well.

Steve
Tech181
Tech181@copperelectronics.com

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: