| Author |
Message |
    
Jaws792
New member
Username: Jaws792
Post Number: 3
Registered: 5-2007
| | Posted on Thursday, May 31, 2007 - 1:58 pm: | 
|
I would like to get a base amplifier to work well with my RCI2995dx with these current settings.
My current radio settings are dead key between 10-50 and it swings to around 175 max on a dummmy load. I would like to get around 1000 or so watts output.
Could someone make a recomendation as to a make and model amp that would work well on AM and SSB with these specifications. i would also like to have a unit with a preamp if this will help with the receive signal. thank you |
Dale
Advanced Member
Username: Dale
Post Number: 932
Registered: 12-2002
| | Posted on Thursday, May 31, 2007 - 4:45 pm: |
|
the only BASE amp i know of is the klv1000p
and at that your pep maybe a little high
dale/a.k.a.hotrod
cef426
cvc#64
|
Twowatt
Member
Username: Twowatt
Post Number: 75
Registered: 7-2005
| | Posted on Wednesday, June 20, 2007 - 6:23 pm: |
|
Jaws792,
Get a Beam - a 3 element will give you well over 1000 watts ERP; as for the preamp, the beam will also increase your receive by at least 1 1/2 S units.
regards |
