Manufacturers
Shop by Brand

AD203 Stinger Board *

AD203 Stinger Board *
Brand: RM Italy
Product Code: W90-30075
Price: $49.99
Qty:     - OR -   Add to Wish List
Add to Compare
2 reviews   Rating: 4/5.
Based on 2 reviews   |  Write a review

Extremely thin, you don't have to remove your speaker!

SPECIFICATIONS
Transistor : (4) RM3
Frequency Range : 25-30MHz AM/FM
Input Power : Recommended -> 2.5-3watts max -> 4 watts
Output Power : 100-150w PEP
Size : 4" x 4" x 1"
Fuse : 5amp

NOTE: Do not install in any radio that will key more than 4 watts.

*These units are for industrial, scientific, medical, or export use only. It is a violation of US FCC regulations to operate these units on the Citizens Band or Amateur Radio Services in the United States. Please check regulations in your country before operating these unit.


W90-30075
| 2 reviews
I put the stinger board in almost all of my moble radios. I have even put it in i few bases. The output of the board is really set by how good the radio does. The power output is somewhere between 55 to 60 watts.
| 2 reviews
I USED THE STINGER IN A HOMEBREW PROJECT AND WAS PLEASED TO FIND THAT THE OUTPUT WAS QUITE CLEAN WITH 3.5 WATTS DRIVE, BUT BEGAN TO DISTORT AND GENERATE OUTOFBAND HARMONICS AT 4 WATTS.THIS WAS EXPECTED AND NOT A PROBLEM. BY CALCULATING 5 AMPS X 12 VOLTS=6O WATTS INPUT, THEN 60 WATTS X 50%=30 WATTS OUTPUT, I DECIDED THE STINGER WOULD WORK AS THE DRIVER FOR MY PROJECT. THE ACTUAL OUTPUT WAS 35 WATTS WHICH WAS SURPRISING, BUT STILL NOWHERE NEAR THE 200 WATTS ADVERTISED.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By Iglou Internet Services, Inc.
Copper Electronics, Inc. © 2019