Shop by Brand

Texas Star DX 1600 Mobile

Texas Star DX 1600 Mobile
Brand: Texas Star
Product Code: W90-00280
Price: $809.99
Qty:     - OR -   Add to Wish List
Add to Compare
7 reviews   Rating: 5/5.
Based on 7 reviews   |  Write a review
  • 100W Input
  • 1200W Output
  • 8- DEI  2SC2879
  • SSB Delay

    *These units are for industrial, scientific, medical, or export use only. It is a violation of US FCC regulations to operate these units on the Citizens Band or Amateur Radio Services in the United States. Please check regulations in your country before operating these unit.


| 7 reviews
I bought one and a Galaxy 98VHP at different times and did a retune on the 98 so I can go down to 6 dead key and stop it at 50 wat DK. I drive the 1600 with around 20 swinging to just around 100 when it beeps, I run a 225 amp alternator, 1000amp battery with a 3farad stiffening cap at the amp on audio grade cable from the batt fused under hood for + & -. No problems running it there with lights and A/C on since alternator is rated to output 135amps at idle speed, just a massaged part of the police package on the Crown Vic Interceptor. Easy kilowatt and could dead key more into it and still have plenty of swing.
| 7 reviews
is good and math with my radio
| 7 reviews
I drove it with a cobra 29 in too a tx250 keying 20 watts swinging 1800 And before you talk smack I put trimmer caps on the output transformers Also larger combiners it kick butt I used 14.2 volts @ 130 amps 1 battery That was my hook up I used
| 7 reviews
Yes, some 1 should inform the public that they should check out their alternator on the vehicle the battery under the hood, this amp can draw up-to 180+amps. "IT TAKES POWER TO MAKE P O W E R !! AND IT WILL NEVER DO/SOUND WHAT IT COULD WITHOUT A GOOD ANTENNA
| 7 reviews
Best Transistor amp I have ever had. I am driving it with a Galaxy DX 55HP. Radio has a Dead KEY OF 3 watts and swinging 35 watts. The Amp is keying 170 watts and swinging 650 watts. That is using a 12v car battery to run the amp. Would do better using a 13.8 volt power supply. And amp was 11 meter ready when it arrived. Copper did that for free. Most places charge an additional 25.00 to do that. Great Work Copper!

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good


Powered By Iglou Internet Services, Inc.
Copper Electronics, Inc. © 2021